Modutec 2000 Series Digital Panel Meters
Modutec 2000 Series Digital Panel Meters

Modutec 2000 Series Digital Panel Meters

Highlights:

You need flexibility. We provide it. We customize our meters to meet your specifications.

Compare
Categories: , Tags: , , , , , ,
Additional information
Weight 2 oz
Dimensions .99 × 3.78 × 1.89 in
Features

• Scalable in engineering units
• Custom labels for special readouts
• User Selectable functions, decimal point, offset, span, process voltage or current, DC voltage
• Red or green backlit display
• Splash and hose proof meeting NEMA 4, NEMA 12, and IPC 55 standards
• Resistant to damage with a high impact polycarbonate case
• Wide operating temperature ranging from -4°F to +140°F (-20°C to +60°C)
• 1/8 DIN industry-standard cut-out and 1-inch depth
• Screw terminals
• Over range indication
• Low cost
• The MODUTEC 2100 includes user-friendly dipswitch selection features
Applications

• Telecommunications
• Water Purification
• Sewage Treatment
• Flow
• Process
• Desalinization
• Temperature
• AC & DC Amps
• AC & DC Volts
FCC Compliance

Complies with the class B Limits of FCC rules and regulations, part 15, sub part J for conducted and radiated emissions.
How to Order

Related Products

IRIS-SC Digital Signal Conditioning Card

IRIS-SC Digital Signal Conditioning Card

Highlights:

The IRIS-SC digital signal conditioning card is a powerful control device designed for use with all Jewell miniature tilt sensors. Output is ASCII RS-232 or RS-422(485) serial. Standard firmware includes five user-programmable alarm/trigger thresholds for tilts tilt switch/control applications. When a selected threshold is reached, the circuitry sets the output high
on one of the pins in the H3 control connector. Other firmware features include user-programmable data output rates, sample averaging, autozero (nulling), and baud rate. The IRIS-SC can also log up to 22,000 samples to internal memory for data dump/download on user command.

All IRIS-SC units include calibration when ordered with Jewell miniature tilt sensors (specify calibrated range on order).

Compare
ECL eCompass Series Electronic Compass Module

ECL eCompass Series

Highlights:

The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all types of challenging conditions.  In standby mode, it draws a mere 50 microamps and requires only 15 mA in run mode. It provides accurate heading data in less than a tenth of a second from wake up. An extended range tilt sensor is available that allows for ±60° of pitch and roll.

Compare
Modutec 1000 Series Digital Panel Meters

Modutec 1000 Series Digital Panel Meters

Highlights:

The Modutec 1000 takes the guesswork out of reading a small, low-cost, digital panel meter. These meters have an over-range indication of the rated value and auto-zero when there is no input signal. They also feature auto polarity which visually clues the user to a negative reading.

The Modutec 1000 features a 0.3-inch digit display in red or green for hard-to-read applications. Choose from bezel or window mount snap-on bezel – neither of which need extra hardware or panel holes. At 1.34″ x 0.75″ and panel depth less than 0.8″ these meters are easy to read, small units that fit into almost any application.

 

Compare
Modutec MD & ME Series Edgewise Panel Meters

Modutec MD & ME Series Edgewise Panel Meters

Highlights:

Useful space-saving meters in two sizes, interchangeable with many costly d’Arsonval meters or moving magnet meters from other sources. All sizes feature flush-to-panel covers without the bulge that disfigures many edgewise meters. A low-cost option provides internal illumination through a translucent dial – sophisticated lighting unusual in any economy meter, let alone an edgewise type.

Compare
AKA Analog MEMS Accelerometer SeriesAKA Analog MEMS Accelerometer Series

DKA Digital MEMS Accelerometer

Highlights:

Jewell Instruments DKA Series Accelerometers are an excellent choice for cost to performance trade off. The DKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

 

 

Compare
DMS Digital MEMS Inclinometer

DMS Digital MEMS Inclinometer

Highlights:

The model DMS is a mid-level performance digital MEMS inclinometer for industrial applications. Standard units are available in RS-232, RS-485 and UART TTL interface options. All DMS series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Compare
DXA-100/200 Series Linear Accelerometer

DXA-100/200 Series Linear Accelerometer

Highlights:

The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed-loop sensor technology to the next level.

CENELEC-CECC-Logo CENELEC-CECC-Logo
Compare

DMH Digital MEMS Inclinometer Series

Highlights:

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS-232, RS-422, RS-485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Compare
Jewell DPM EINE

Jewell DPM EINE

Highlights:

The digital panel meter has been designed for industrial applications, which frequently require precise, onsite adjustment of the display range. It can be used in industrial automation and for laboratory uses. DPM EINE measures important electrical parameters in 3 phase 4 wire, 3 phase 3 wire, and single phase network replaces the multiple analog panel meters.

Compare
Jewell Digital Panel Meter 48x96

Jewell DPM 48×96

Highlights:

The digital panel meter, DPM 48×96 has been designed for industrial automation and laboratory uses which frequently require precise, onsite adjustment of the display range. With versions available for current (A, B), voltage (C, F) sensors, this panel meter is a cost-effective choice for virtually all switchboard instruments.

*Note: Models AC & T no longer available.

 

Compare

Model 820 Shallow Water Tiltmeter Series

Highlights:

The model 820 Shallow Water is a high-precision submersible tiltmeter for use in fresh and saltwater applications. Using an absolute gravity-referenced electrolytic sensor, the 820 delivers superior measurement accuracy with virtually no long-term drift. High-gain units are sensitive to <0.0017 mm/m or better. Output options include analog (±5 VDC, ±10 VDC), current (4-20mA), and digital (RS-232 and RS-422). All units are rated to 200 meters (656.2 ft) waterproof for advanced protection from the elements. Use the 820 “Shallow Water” for structural monitoring, angle measurement and control, platform leveling, and more.

 

 

Compare
Model MD900-T Digital Clinometer

Model MD900-T Digital Clinometer

Highlights:

The biaxial model MD900-T is an economical digital clinometer with powerful firmware features. User programmable settings include AUTO-zero (tare), baud and output rate, sample averaging, and more. Output is RS-232 or RS-422 (RS-485 full-duplex). The MD900-T easily integrates with a variety of GPS receivers and supports Trimble TCM, NMEA XDR, BAE, and Ashtech output protocols. Units ship standard with 6-ft. hook-up cable and a 100-240VAC power transformer. Use the MD900T for industrial pitch and roll measurement, marine piling, dredging and construction systems, platform leveling, geotechnical monitoring, and more.

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping