Jewell Digital Panel Meter 48x96
Jewell Digital Panel Meter 48x96

Jewell DPM 48×96

Highlights:

The digital panel meter, DPM 48×96 has been designed for industrial automation and laboratory uses which frequently require precise, onsite adjustment of the display range. With versions available for current (A, B), voltage (C, F) sensors, this panel meter is a cost-effective choice for virtually all switchboard instruments.

*Note: Models AC & T no longer available.

 

Compare
Categories: , Tag:
Additional information
Weight 17.6 oz
Dimensions 5.4 × 3.8 × 1.9 in
Features

• Scaling adjustable over a wide range
• Highly adaptable
• Chosen input range is user adjustable from 10% to 100% of the full-scale value
How to Order

EXAMPLE
TypeDPM 48x96 AC
Measuring Input0...1A
Display0...1000
Display Caption
OptionsA
Supply Voltage24V DC

Related Products

Place holder

Emico Series 12

Highlights:

Edgewise compact indicator is frequently used to indicate go/no-go circuit condition or as a miniature null type zero-center tuning indicator to indicate balance in position. 5% Accuracy meters incorporate a moving magnet mechanism. Available size 1.375″.

Compare
DXA-100/200 Series Linear Accelerometer

DXA-100/200 Series Linear Accelerometer

Highlights:

The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed-loop sensor technology to the next level.

CENELEC-CECC-Logo CENELEC-CECC-Logo
Compare

Model 802 Deep Water Submersible Tiltmeter Series

Highlights:

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector. The pressure rating is 250 bars (2500 meters depth). Higher-pressure versions may be special ordered. Temperature rating is governed by the neoprene connector. Wider temperature range is available with other connector types. Units are available in a variety of configurations including single axis (uniaxial), or dual-axis (biaxial), analog, digital, or 4-20mA outputs.

 

Compare
Jewell DPM 72x144 4½ digit panel meter

Jewell DPM 72 x 144

Highlights:

The Jewell DPM 72×144 4½ digit panel meters have been designed for industrial applications which frequently require precise and on-site adjustment of the display range. They are available in DC or AC current or voltage ranges. For use in industrial automation and for laboratory uses.

Compare
JDI-100/200 Digital MEMS Inclinometer Series

JDI-100/200 Digital MEMS Inclinometer Series

Highlights:

The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual-axis configurations. The robust and rugged design is great for industrial use, yet includes the low-cost MEMS technology. These units are available with DB9, Pigtail, Deutsch, Double Deutsch, 6-Pin Circular (C06), or M12 connectors for maximum versatility.RoHs_logo

 

 

Compare

DMH Digital MEMS Inclinometer Series

Highlights:

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS-232, RS-422, RS-485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Compare
ECC eCompass Series Electronic Compass Modules

ECC eCompass Series

Highlights:

The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial users.

Compare
Modutec DW Series Digital Panel Meters

Modutec DW Series Digital Panel Meters

Highlights:

Get digital accuracy with an analog footprint. The DW Series is a cost-effective solution to retrofitting an analog panel cutout with a digital meter. Custom nomenclature available. Easy hook up from the rear with four studs. The MODUTEC DW Series is available as DC and AC Power Monitors and Process Monitors.

Compare

Model 701 Platform Tiltmeter Series

Highlights:

The Model 701-2 Platform mount tiltmeter is our most popular design for high precision tilt measurements. Units come with built-in invar leveling legs, for easy installation on any horizontal surface. The A701-2 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity-referenced electrolytic sensor, the A701 delivers ultra-high sensitivity to <0.1 µrad with virtually zero long-term drift. The output is a stable ±8 DC voltage (±16 VDC differential). The D701 digital version has onboard memory, with a storage capacity of up to 22,000 samples.

 

 

Compare

Model 711-2 & A716-2

Highlights:

The models A711-2 (floor-mount), and A716-2 (wall-mount) bolt or clamp to any surface, and are well suited for areas with heavy traffic or vibration. Electronic performance is identical to the model A701-2. Floor-mount models are available with a weatherproof NEMA 4X seal (A711-2 4X), or with an RS-232, RS-422, or RS-485 digital output (D711). D711 units also include onboard memory with a storage capacity of up to 22,000 samples. Units include two switchable gains and two low-pass filter settings and are sensitive to <0.1 µrad. Applications include volcano monitoring, high-precision geotechnical engineering, bridge deflection monitoring, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications where bolt-on installations are required.

Compare
Model 801 “Tuff Tilt” Tiltmeter SeriesModel C904 Clinometer Pak 420

Model 801 “Tuff Tilt” Tiltmeter Series

Highlights:

The Model 801 “Tuff Tilt” Tiltmeter series combines high precision and durability in an economical instrument package. Using an absolute gravity referenced electrolytic sensor, the 801 series delivers superior measurement accuracy with virtually no long-term drift. Units are available in a variety of configurations including single axis (uniaxial), or dual axis (biaxial), analog, digital, or 4-20mA outputs.

All units are rated IP65 waterproof for advanced protection from the elements.

 

 

Compare
ECG eCompass Series Electronic Compass Module

ECG eCompass Series

Highlights:

If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost more. The ECG provides remarkably accurate heading, pitch, and roll in dynamic conditions. It all starts with a precision 3-axis solid-state magnetometer. Two angular rate gyros independently stabilize pitch and roll. They augment a dual-axis, electrolytic tilt sensor that provides precise tilt measurements in static environments. Two sets of independent filters, one set for pitch and one for roll, combine gyro and electrolytic sensor measurements to provide the best available tilt measurements.

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping