Awaiting product image

Modutec 2% Panel Meters 2810/CLE8 Series

Highlights:

Features unique case design, enclosed meter movement with the scales located behind an internal housing for greater dust resistance. Scales can be replaced without chance of damage to the movement. Available in sizes 3.5″ and 4.5″.

Compare
Categories: , Tags: ,
Additional information
Features

• Replacement scales are readily available and easily replaced without chance of damage to the movement.
• Large, easy-to-read scales, clearly illuminated from ambient light.
• These panel meters feature a unique case design, an enclosed meter movement with scales behind an internal housing for greater dust resistance than conventional front and rear meter case design.
• AC ammeters use pivot and jewel movements.
• High current self-contained AC ammeters feature integral shields which minimize stray flux field effects
• DC meters use taut-band movements
How to Order

Please refer to the 2810 Series Catalog in the Downloads section of this page.

Related Products

Jewell FML Series – Frequency Meters

Highlights:

The pointer type frequency meters, FML 96 and FML 144 housed in molded polycarbonate cases are used for the measurement of frequencies in the range of 45 to 450 Hz. For maximum accuracy, the essential measuring range is obtained by suppressing the unwanted frequency span. These instruments offer several advantages in switchboards and panel cut out. A number of meters can be mounted in a panel cut-out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.

Compare
A&M MR Panel Meter Ruggedized Series

A&M MR Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. MR34 Long-scale panel meters are ideal for military and commercial applications. Available 1.5″ (MR13), 2.5″ (MR26) and 3.5″ (MR34 & MR35)sizes.

Compare
Modutec W-Series Windo-mount™ Panel Meters

Modutec W-Series Windo-mount™ Panel Meters

Highlights:

Windo-mount™ is a sophisticated design that has been found universal acceptance since being introduced many years ago by Modutec. The W series meters are easily installed per applications bulletin AB6-1; when so installed the meter cover is flush with the panel surface, with the dial easily read.

W series meters are available in the same ranges and at the same prices as the S series meters. They offer an excellent functional appearance, plus the looks enhancing edge options available. These meters are very popular for stereo and broadcast equipment.

Compare
A&M 2.5 Square Ruggedized Series

A&M 2.5 Square Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.

Compare

Model 820 Shallow Water Tiltmeter Series

Highlights:

The model 820 Shallow Water is a high-precision submersible tiltmeter for use in fresh and saltwater applications. Using an absolute gravity-referenced electrolytic sensor, the 820 delivers superior measurement accuracy with virtually no long-term drift. High-gain units are sensitive to <0.0017 mm/m or better. Output options include analog (±5 VDC, ±10 VDC), current (4-20mA), and digital (RS-232 and RS-422). All units are rated to 200 meters (656.2 ft) waterproof for advanced protection from the elements. Use the 820 “Shallow Water” for structural monitoring, angle measurement and control, platform leveling, and more.

 

 

Compare
JMI-100/200 Analog MEMS Inclinometer Series

JMI-100/200 Analog MEMS Inclinometer Series

Highlights:

The JMI-100/200 series is a robust and rugged MEMS inclinometer available in single and dual-axis configurations. The low-cost MEMS technology is great for industrial use. These units are available in single-axis or dual-axis, and we also offer three output options: 0-5VDC (S series), 4-20mA (L series), and ±5VDC (D Series).

RoHs_logo

Compare

Model 802 Deep Water Submersible Tiltmeter Series

Highlights:

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector. The pressure rating is 250 bars (2500 meters depth). Higher-pressure versions may be special ordered. Temperature rating is governed by the neoprene connector. Wider temperature range is available with other connector types. Units are available in a variety of configurations including single axis (uniaxial), or dual-axis (biaxial), analog, digital, or 4-20mA outputs.

 

Compare
AMH Analog MEMS Inclinometer Series

AMH Analog MEMS Inclinometer Series

Highlights:

The AMH Series is a single or dual axis, high precision MEMS inclinometer. Standard units come with 0-5V, 0.5-4.5V or 4- 20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request

 

Compare
Modutec MD & ME Series Edgewise Panel Meters

Modutec MD & ME Series Edgewise Panel Meters

Highlights:

Useful space-saving meters in two sizes, interchangeable with many costly d’Arsonval meters or moving magnet meters from other sources. All sizes feature flush-to-panel covers without the bulge that disfigures many edgewise meters. A low-cost option provides internal illumination through a translucent dial – sophisticated lighting unusual in any economy meter, let alone an edgewise type.

Compare
Jewell DS Series Moving Coil Panel Meters

Jewell DE Series – Moving Iron

Highlights:

The moving iron panel meters, DE 48/72/96/144 housed in cases made of molded polycarbonate are suitable for the measurement of AC currents for the frequency range of 15 to 400 Hz and voltages in the frequency range of 15 to 100Hz. Moving iron meters indicate RMS values practically independent of waveform even of high harmonics. An error of indication may occur for extreme waveforms (e.g. phase gating controls) & for frequencies above 100KHz.

These meters offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout mosaic mounting. For CT-operated ammeters, dials can be fitted based on CT ratio. Glass and bezel can easily be replaced.

Compare
Modutec DW Series Digital Panel Meters

Modutec DW Series Digital Panel Meters

Highlights:

Get digital accuracy with an analog footprint. The DW Series is a cost-effective solution to retrofitting an analog panel cutout with a digital meter. Custom nomenclature available. Easy hook up from the rear with four studs. The MODUTEC DW Series is available as DC and AC Power Monitors and Process Monitors.

Compare
Modutec S-Series Surface Mount Panel Meters

Modutec S-Series Surface Mount Panel Meters

Highlights:

The S Series Surface Mount Panel Meters are clean-cut meters with straightforward design and pleasing aspect ratio are leaders of the Modutec line and add distinction to any instrument or control panel. Available in five sizes and a wide variety of types and ranges, they resolve many problems for the equipment designer and are always a solid choice for function and appearance.

AC Meters in this series are available in both moving coil (rectifier type) and iron vane versions. The latter has the virtue of being relatively insensitive to input distortion, while the rectifier type is less affected by frequency variations.

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping