ECV-IMU Inertial Measurement Unit

Highlights:

Jewell Instruments’ offers ECV-IMU Series initial measurement units which assure high accuracy in a small package. This inertial measurement unit is a cost efficient, low power consuming device which provides stable azimuth, pitch, and roll measurements in dynamic conditions. This sensor consists of 3-axis angular rate gyros, 3-axis accelerometer, 3-axis magnetometer, and optional 2-axis electrolytic tilt sensor. These IMUs have a wide operating range and are factory calibrated. Hence, they offer an accurate and fast output through RS-485.

ROHS

Compare
Categories: , Tags: , , , , , , , ,
Additional information
Weight 7.1 oz
Dimensions 5.43 × 2.38 × 1.22 in
Features

• Exceptional dynamic performance
• High accuracy
• Precise factory calibration
• Wide operating range
• RS-485 output
• Anodized and Alodine Aluminum enclosure
• Fast response
• Low power
Applications

• Unmanned vehicles
• Robotics
• Platform stabilization
• Excavation machinery
• Rail

Related Products

AKA Analog MEMS Accelerometer SeriesAKA Analog MEMS Accelerometer Series

AKA Analog MEMS Accelerometer Series

Highlights:

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

 

 

Compare
AKA Analog MEMS Accelerometer SeriesAKA Analog MEMS Accelerometer Series

DKA Digital MEMS Accelerometer

Highlights:

Jewell Instruments DKA Series Accelerometers are an excellent choice for cost to performance trade off. The DKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

 

 

Compare
ASXC Angular Accelerometer

ASXC Angular Accelerometer

Highlights:

The Jewell ASXC Series Fluid Rotor Angular Accelerometer is a force balanced servo accelerometer that uses a fluid-filled ring chamber to measure angular acceleration. The ASXC is currently used in a wide variety of applications such as many military and aviation flight controls including autopilot or aircraft stability and control systems or satellite stability.

 

 

Compare
QFA-180 Quartz Flexure Accelerometer SeriesQFA-125 Quartz Flexure Accelerometer Series

QFA-150 Quartz Flexure Accelerometer Series

Highlights:

The Jewell Instruments QFA-150 Series Accelerometers are state of the art quartz flexure technology that provides high accuracy, repeatability and stability even in the harshest of environments.

Compare
Model 84064-02 Wide-angle Ceramic Tilt Sensor

Models 84064-02 & 59579-02 Wide-Angle Ceramic Sensors

Highlights:

The Model 84064-02 Wide-angle Ceramic Tilt Sensor is a high-precision electrolytic tilt sensor with terrific linearity over a full ±75° of angular range. The alumina sensor has a fast warm-up and excellent thermal, mechanical, and long-term stability. It is mounted on an anodized aluminum bracket for strength and easy installation (Model 59579-02 is the same sensor without the mounting bracket). The small and lightweight assembly attaches directly to the elements you want to measure, without unbalancing them or altering their performance. Use the 84064-02 and 59579-02 sensor for wide-angle sensor applications where high performance and linearity over range are key. Use any of our analog or digital signal conditioning units for operating these sensors.

All 84064-02 and 59579-02 Ceramic Tilt Sensors include calibration over ±50° when ordered with Jewell electronics (or specify special/custom calibrated ranges on order).

Compare

DMH Digital MEMS Inclinometer Series

Highlights:

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS-232, RS-422, RS-485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Compare
Model 750-200 Tiltmeter Series

Model D750-100/200 Tiltmeter Series

Highlights:

The D750-100/200 tiltmeter series is the digital version of the Black Diamond Tiltmeter sensor line for geotechnical measurement. It includes a 0.001° and industry standard RS-485 or RS-422 digital output signals.

 

 

Compare
ECS digital compass sensor

ECS eCompass Series

Highlights:

The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over three prior generations of compasses to deliver the ultimate in performance from the available sensor data.

Compare
ECC eCompass Series Electronic Compass Modules

ECC eCompass Series

Highlights:

The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial users.

Compare
JMA-100/200/300 Analog MEMS Accelerometer Series

JMA-100/200/300 Analog MEMS Accelerometer Series

Highlights:

The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200), and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology.
RoHs_logo

Compare
LILY Self-Leveling Borehole Tiltmeter

LILY Self-Leveling Borehole Tiltmeter

Highlights:

Using a high-precision electrolytic tilt sensor, units deliver resolutions to 5 nano radians; the dynamic range is ±330 µradians. Units also feature a ±10 deg. leveling range for easy installation downhole. Output is RS-232 or RS-422 (RS-485 full-duplex) and includes timestamp and compass bearing. Data can be saved to file externally or to LILY’s on-board flash memory (75,000 sample max) using fill/stop or cyclic memory modes.

Units are fully submersible to 3000 psi. Titanium is also available for +5000 psi applications. The culmination of over 30 years of tilt sensor experience and expertise, the LILY represents the pinnacle in precision sensor engineering.

 

 

Compare
Model 801 “Tuff Tilt” Tiltmeter SeriesModel C904 Clinometer Pak 420

Model 801 “Tuff Tilt” Tiltmeter Series

Highlights:

The Model 801 “Tuff Tilt” Tiltmeter series combines high precision and durability in an economical instrument package. Using an absolute gravity referenced electrolytic sensor, the 801 series delivers superior measurement accuracy with virtually no long-term drift. Units are available in a variety of configurations including single axis (uniaxial), or dual axis (biaxial), analog, digital, or 4-20mA outputs.

All units are rated IP65 waterproof for advanced protection from the elements.

 

 

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping