Products

Products

Showing all 33 results

Grid View List View

Show:

Clear filters

755 & 756 Miniature Tilt Sensors

755 & 756 Miniature Tilt Sensors

Highlights:

755- and 756-Series Miniature Tilt Sensors contain one or two of our electrolytic tilt transducers in a solid stainless steel or aluminum housing, with holes for vertical or horizontal mounting. These are the same high-precision sensors that we use in our 500– and 700-Series tiltmeters. Several of the models are available in vacuum-compatible versions designed for minimal outgassing under high-vacuum conditions. Two options are available, the high-gain 755-Series and mid-range 756-Series. Typical applications for these compact modules include X-ray mirrors, telescope mounts, wind tunnel models, and medical devices. The sensors may be operated at a distance (cable length) up to 100m from their Jewell Instruments signal conditioner.

AMA Analog MEMS Accelerometer Series

AMA Analog MEMS Accelerometer Series

Highlights:

Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

AMH Analog MEMS Inclinometer Series

AMH Analog MEMS Inclinometer Series

Highlights:

The AMH Series is a single or dual axis, high precision MEMS inclinometer. Standard units come with 0-5V, 0.5-4.5V or 4- 20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request

AMI Analog MEMS Inclinometer Series

AMI Analog MEMS Inclinometer Series

Highlights:

The AMI Series is a single or dual axis, high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request

AML Analog MEMS Inclinometer Series

AML Analog MEMS Inclinometer Series

Highlights:

The Jewell Instruments model AML is a low cost analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AML series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request.

AMS Analog MEMS Inclinometer Series

Highlights:

The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AMS series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request.

ASB Series Angular Accelerometer

ASB Series Angular Accelerometer

Highlights:

The Jewell ASB Series Angular Accelerometer is a general-purpose ±200 radian/second² to ±1000 radian/second² device for industrial, commercial and sensing requirements.

DMH Digital MEMS Inclinometer Series

Highlights:

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS-232, RS-422, RS-485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

DML Digital MEMS Inclinometer

DML Digital MEMS Inclinometer

Highlights:

The Jewell Instruments model DML is a low cost digital MEMS inclinometer for industrial applications. Units are available with RS-232, RS-485 and UART TTL output options. All DML series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

DMS Digital MEMS Inclinometer

DMS Digital MEMS Inclinometer

Highlights:

The model DMS is a mid-level performance digital MEMS inclinometer for industrial applications. Standard units are available in RS-232, RS-485 and UART TTL interface options. All DMS series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

DXA-100/200 Series Linear Accelerometer

DXA-100/200 Series Linear Accelerometer

Highlights:

The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed-loop sensor technology to the next level.

DXI-100/200 Digital Inclinometer

DXI-100/200 Digital Inclinometer

Highlights:

The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed-loop sensor technology to the next level. The DXI-100/200 is available with either RS-422 or RS-485 (Standard) digital interfaces. With a variety of options, including metric mounting threads, a flanged base, and CENELEC/AREMA certified, this product is easily customized to suit your specific application.

eDXI-100/200 Single or Dual Axis Digital Inclinometer

eDXI-100/200 Single or Dual Axis Digital Inclinometer

Highlights:

The Jewell eDXI-100/200 Series is a single or dual digital inclinometer with the convenience of Ethernet output. With its power over ethernet capability, no power source is needed. Simply plug it in to your computer.

JDI-100/200 Digital MEMS Inclinometer Series

JDI-100/200 Digital MEMS Inclinometer Series

Highlights:

The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual-axis configurations. The robust and rugged design is great for industrial use, yet includes the low-cost MEMS technology. These units are available with DB9, Pigtail, Deutsch, Double Deutsch, 6-Pin Circular (C06), or M12 connectors for maximum versatility.

JMA-100/200/300 Analog MEMS Accelerometer Series

JMA-100/200/300 Analog MEMS Accelerometer Series

Highlights:

The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200), and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology.

JMI-100/200 Analog MEMS Inclinometer Series

JMI-100/200 Analog MEMS Inclinometer Series

Highlights:

The JMI-100/200 series is a robust and rugged MEMS inclinometer available in single and dual-axis configurations. The low-cost MEMS technology is great for industrial use. These units are available in single-axis or dual-axis, and we also offer three output options: 0-5VDC (S series), 4-20mA (L series), and ±5VDC (D Series).

LCA-100 Series Accelerometer

LCA-100 Series Accelerometer

Highlights:

The Jewell LCA-100 Series Accelerometer is a general-purpose ±0.5g to ±5g device which is DO-160 approved for aerospace applications. These linear accelerometers are designed for industrial, commercial and aerospace sensing requirements.

LCF-100 Single-Axis Analog Inclinometer

LCF-100 Single-Axis Analog Inclinometer

LCF-100 Single-Axis Analog Inclinometer

Highlights:

The Jewell LCF Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn-on repeatability and very low hysteresis. This unit is available with a pin terminal connection or a 6-pin cable connection.

LCF-200 Series Accelerometer

LCF-200 Series Accelerometer

Highlights:

The Jewell LCF-200 Series Flexure Suspension Fluid Damped Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low hysteresis.

LCF-300 Single-Axis Analog Inclinometer

LCF-300 Single-Axis Analog Inclinometer

LCF-300 Single-Axis Analog Inclinometer

Highlights:

The Jewell LCF-300 Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are present. LCF-300 units are characterized by excellent turn on repeatability and very low hysteresis. It is available in three different versions (D, L, or S), varying input and output, and with either a 6 pin connector or a pin-terminal option in order to meet your specific needs.

LCI Single-Axis Analog Inclinometer

LCI Single-Axis Analog Inclinometer

Highlights:

The Jewell LCI Series flexure suspension servo inclinometer is a ±3° to ±90° device designed for low frequency tilt sensing applications. LCI units are characterized by excellent turn on repeatability and very low hysteresis.

LSB Series Linear Accelerometer

LSB Series Linear Accelerometer

Highlights:

The Jewell LSB Series Accelerometer is a general-purpose ±0.5G to ±20G linear device designed for rail, commercial, and aerospace sensing requirements. Available with either pin or a circular connector termination.

arema_web

LSO Single-Axis Analog Inclinometer

LSO Single-Axis Analog Inclinometer

Highlights:

The Jewell LSO Series fluid damped, flexure suspension, servo inclinometer is a precision internal grade sensing instruments and it is Jewell’s most robust solution designed to meet the needs of a variety of commercial, industrial, and aerospace applications. LSO Series is a fluid damped design. Units are available with a 6-pin connector, or pin-terminals and in ±5V and 4-20mA outputs.

LSOX Single-Axis Analog Inclinometer

LSOX Single-Axis Analog Inclinometer

Highlights:

The Jewell LSOX Single-Axis Analog Inclinometer series are a rugged, high precision tilt sensor designed for peak performance in extreme conditions. These RoHS compliant sensors feature a fluid damped mechanism to deliver superior noise rejection in high shock and vibration environments as well as excellent output stability. Units are available with a 6-pin connector, pin-terminals, or flying leads and in three different output versions (D, L, & S). LSOX-S is available with CE Certification.

LSRP Single-Axis Analog Inclinometer

LSRP Single-Axis Analog Inclinometer

Highlights:

The Jewell LSRP Series inclinometer is an extremely sensitive, rugged transducer designed to provide horizontal angle or vertical deviation measurements with virtually infinite resolution. These fluid-damped compact, cylindrical-shaped sensors are stackable to meet the needs of applications with space constraints while facilitating the use of several inclinometers for multi-axis measurements.

Model 801 “Tuff Tilt” Tiltmeter Series

Model C904 Clinometer Pak 420

Model 801 “Tuff Tilt” Tiltmeter Series

Highlights:

The Model 801 “Tuff Tilt” Tiltmeter series combines high precision and durability in an economical instrument package. Using an absolute gravity referenced electrolytic sensor, the 801 series delivers superior measurement accuracy with virtually no long-term drift. Units are available in a variety of configurations including single axis (uniaxial), or dual axis (biaxial), analog, digital, or 4-20mA outputs.

All units are rated IP65 waterproof for advanced protection from the elements.

Model 850 MEMS Tuff Tilt Series

Model 850 MEMS Tuff Tilt Series

Highlights:

This geotechnical MEMS tiltmeter is available in uniaxial and biaxial configurations. It presents a robust and rugged design for outdoor geotechnical use, but with the benefit of low-cost MEMS technology and ±5VDC, 0-5 VDC, or 4-20 mA output signals. It is an effective tilt sensing solution for platform leveling/positioning, structural monitoring, construction monitoring, industrial machinery positioning, radial gate measurement & control.

Model 875 Mini Tuff Tilt

Model 875 Mini Tuff Tilt

Highlights:

The model 875 Mini “Tuff Tilt” Tiltmeter combines high precision and durability in a miniaturized and economical instrument package. Using MEMS technology, the 875 delivers superior measurement accuracy with virtually no long-term drift and a resolution of 0.05°. Output options include 0.5-4.5Vdc, 4-20mA and digital RS-485. All units are rated IP67 waterproof for advanced protection from the elements. Use the 875 Mini “Tuff Tilt” for structural monitoring, angle measurement, and control, platform leveling, testing and research, OEM, and more.

Model 901 & 902 Clinometer

Model 901 & 902 Clinometer

Highlights:

Model 901 (horizontal) and 902 (vertical) Uniaxial & Biaxial Clinometers accurately measure an angular position with the same performance as Model 900, but in a slim design for use where space is limited. High-gain, standard, and wide-angle versions are available, each with a different angular range. A901 and A902 (biaxial) use high-level voltage outputs to allow signals to be delivered over long cables. C901 and C902 – also referred to as ‘Tulip’ (uniaxial) are loop-powered, so measurements can be made using an economical 2-wire pair. These conveniently sized, low-cost units fit neatly into underwater pressure housings, well logging tools, drilling equipment, and many other devices.

Model 906 Little Dipper In-Place Inclinometer

Model 906 Little Dipper In-Place Inclinometer

Highlights:

Little Dipper is an in-place inclinometer system for monitoring slopes, embankments, deep excavations, tunnels, tank foundations, retaining walls, and other types of ground movement. Installed as a string of vertical or horizontal sensors inside inclinometer casing, or by direct burial, this instrument provides a continuous record of ground displacement. Fiberglass rods connect the sensors inside the casing, and fins or universal pivots couple the sensors to the casing walls. Little Dipper’s on-board electronics accept a wide input voltage range and drive long cables without signal loss. The waterproof and non-corrodible ABS sensor housing also makes the Little Dipper a popular tool for underwater tilt measurements in shallow marine applications. Select analog voltage output (biaxial) or 4-20 mA output (uniaxial only).

RMIW Single-Axis Analog Inclinometer

RMIW Single-Axis Analog Inclinometer

Highlights:

The Jewell RMIW Series, RoHS compliant, flexure suspension, servo inclinometer is a precision internal grade sensing instrument. The RMIW is available in three different versions (D, L, or S), with customer-specified mounting options, and varying input and output specifications in order to meet your needs.

SMA Series Linear Accelerometer

SMA Series Linear Accelerometer

Highlights:

The Jewell SMA Series accelerometer is a low cost, high precision sensor designed with very high accuracy. Applications include robotics, construction equipment, industrial measurement and control, and precision machining. All Emerald Series accelerometers are RoHS compliant.

SMI Single-Axis Analog Inclinometer

SMI Single-Axis Analog Inclinometer

SMI Single-Axis Analog Inclinometer

Highlights:

The Jewell SMI Single-Axis Analog Inclinometer series are rugged, high-precision force-balanced inclinometers. These RoHS-compliant inclinometers are available in three different versions (D, L, & S series), with either a circular connector or a pin connection, and varying input and output specifications in order to meet your specific needs.

Scroll To Top

My Cart

Shopping cart is empty!

Continue Shopping