ECS digital compass sensor
ECS digital compass sensor

ECS eCompass Series

Highlights:

The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over three prior generations of compasses to deliver the ultimate in performance from the available sensor data.

Compare
Categories: , , Tags: , , , , , , , , , , , , ,
Additional information
Dimensions 5.43 × 2.38 × 1.22 in
Features

• Wide Operating Temperature Range
• Single-Supply Operation
• RS-232 & RS-485 Outputs Available
• In-System Configuration & Test
• Plastic or Aluminum Enclosure Options
Applications

• Unmanned Vehicles
• Robotics
• Weather Buoys
• Antenna Positioning
• Marine Navigation

Related Products

LCF-3500 Series Linear Accelerometer

LCF-3500 Series Linear Accelerometer

Highlights:

The Jewell LCF-3500 Series Flexure Suspension Fluid Damped Tri-Axial Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low hysteresis.

Compare
AKA Analog MEMS Accelerometer SeriesAKA Analog MEMS Accelerometer Series

AKA Analog MEMS Accelerometer Series

Highlights:

Jewell Instruments AKA Series Accelerometers are an excellent choice for cost to performance trade-off. The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

 

 

Compare
A&M 2.5 Square Ruggedized Series

A&M 2.5 Square Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.

Compare
ECV eCompass Series 3D electronic compass sensor

ECV eCompass Series

Highlights:

The ECV eCompass Series is a 3D electronic compass providing stable azimuth, pitch, and roll measurements in dynamic conditions. As an enhanced version of our ECG Series, the ECV includes a full suite of precision, 3-axis, MEMS sensors, and an optional dual-axis electrolytic tilt sensor, for the ultimate in near-level accuracy. A high-performance microcontroller orchestrates the fast measurement sequence, sensor calibration adjustments, frame-of-reference translations, trigonometric calculations, and advanced signal processing required to provide accurate heading, pitch, and roll outputs.

Compare
Modutec 1000 Series Digital Panel Meters

Modutec 1000 Series Digital Panel Meters

Highlights:

The Modutec 1000 takes the guesswork out of reading a small, low-cost, digital panel meter. These meters have an over-range indication of the rated value and auto-zero when there is no input signal. They also feature auto polarity which visually clues the user to a negative reading.

The Modutec 1000 features a 0.3-inch digit display in red or green for hard-to-read applications. Choose from bezel or window mount snap-on bezel – neither of which need extra hardware or panel holes. At 1.34″ x 0.75″ and panel depth less than 0.8″ these meters are easy to read, small units that fit into almost any application.

 

Compare
Model A601-2A/2B High-precision Platform Tiltmeter

Model A601-2A/2B High-precision Platform Tiltmeter

Highlights:

The model A601-2 Platform mount tiltmeter is designed for high precision tilt measurements. Units come with built-in micrometer leveling legs, for easy installation on any horizontal surface. The A601-2 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity-referenced electrolytic sensor, the A601-2 delivers ultra-high sensitivity to <25 nrad with virtually zero long-term drift. Output is a stable ±8 DC voltage (±16 VDC differential). Rugged, reliable, and extremely accurate, the A601-2 is the preferred choice for volcano monitoring, high-precision geotechnical engineering, bridge deflection monitoring, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications worldwide.

Compare

DMH Digital MEMS Inclinometer Series

Highlights:

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS-232, RS-422, RS-485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Compare
Model 801 “Tuff Tilt” Tiltmeter SeriesModel C904 Clinometer Pak 420

Model 801 “Tuff Tilt” Tiltmeter Series

Highlights:

The Model 801 “Tuff Tilt” Tiltmeter series combines high precision and durability in an economical instrument package. Using an absolute gravity referenced electrolytic sensor, the 801 series delivers superior measurement accuracy with virtually no long-term drift. Units are available in a variety of configurations including single axis (uniaxial), or dual axis (biaxial), analog, digital, or 4-20mA outputs.

All units are rated IP65 waterproof for advanced protection from the elements.

 

 

Compare
Place holder

Emico Series 802

Highlights:

Series 802 are very small, low-cost, uncalibrated devices for indicating on-off conditions or voltage transition points. They are rugged, dependable, and require less than 2mW to move the flag or pointer. The two types are:

Flag Type (802F)  – A white flag moves from one end of the red & white scale to the other when a predetermined voltage value is exceeded. Provides on-off indication.

Pointer Type (802P) – A pointer moves across the scale to indicate circuit condition. The pointer may be factory set for left, right, or exact center position to indicate zero current. The center point can be specified for a given voltage (±5%) within the range of the device.

Either type can be made to operate with a Zener diode to indicate voltage changes as low as 1 volt.

Compare
LCF-196 Dual-Axis Analog Inclinometer

LCF-196 Dual-Axis Analog Inclinometer

Highlights:

The Jewell LCF-196 Series is a high accuracy sensor designed for applications where high levels of shock and vibration are present. The LCF-196 is two-axis tilt sensor in a 22mm diameter stainless steel package. Rugged, dual-axis, fluid-damped tubular style sensor.

 

 

Compare
LSRP Single-Axis Analog Inclinometer

LSRP Single-Axis Analog Inclinometer

Highlights:

The Jewell LSRP Series inclinometer is an extremely sensitive, rugged transducer designed to provide horizontal angle or vertical deviation measurements with virtually infinite resolution. These fluid-damped compact, cylindrical-shaped sensors are stackable to meet the needs of applications with space constraints while facilitating the use of several inclinometers for multi-axis measurements.

RoHs_logo

 

 

 

 

Compare
MODUTEC BL Digital panel meter

Modutec BL Series

Highlights:

The MODUTEC BL Digital panel meter gives you all the functionality you need with none of the extras you don’t need. That means simplicity, easy readability, a small footprint, and a low cost.

 

 

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping