Modutec MAS Series Rectangular Panel Meters
Modutec MAS Series Rectangular Panel Meters

Modutec MAS Series Rectangular Panel Meters

Highlights:

Attractive contemporary designs with the typical Modutec low aspect ratio. All have operating zero adjusters, and scales printed on translucent plastic, permitting beautifully diffused lighting using either the external light kit described in “options” or a custom light source.

Compare
Categories: , Tags: , , ,
Additional information
Features

• Mount flush or surface without modification.
• Precision-molded covers and cases.
• Accuracy 5% of full scale.
• High torque, powerful ballistic movements permit mounting in steel panels without special calibration.
• Beautiful styling with subtle translucent lighting available in rectangular and square models.
• Production-engineered quick mounting and electrical connections.
How to Order

Please refer to the MAS Catalog in the Downloads section of this page. Mention any options you would like to add to your meter.

Related Products

Jewell DSL Series – DC Ammeters/Voltmeters

Jewell DSL Series – DC Ammeters/Voltmeters

Highlights:

The moving coil panel meters, DSL 48/72/96/144 are housed in molded polycarbonate cases are suitable for the measurement of DC currents and voltages. These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cut out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.

Compare
Jewell surface mounted HS series analog panel meter

Jewell HS Series

Highlights:

The Jewell surface mounted HS series analog panel meter is renowned for its resistance to shock, vibration, and moisture. Special parts and fastening reduce the effects of hard usage; a one-piece, steel case provides magnetic and electrostatic shielding; and a convex glass window is hermetically sealed.

Compare
Place holder

Modutec 2% Panel Meters 2810/CLE8 Series

Highlights:

Features unique case design, enclosed meter movement with the scales located behind an internal housing for greater dust resistance. Scales can be replaced without chance of damage to the movement. Available in sizes 3.5″ and 4.5″.

Compare
Jewell DGL Series – AC Ammeters/Voltmeters

Jewell DGL Series – AC Ammeters/Voltmeters

Highlights:

The moving coil, rectifier panel meters DGL 48/72/96/144 are housed in polycarbonate cases and are suitable for the measurement of AC currents and voltages. Moving coil rectifier instruments measure average values and are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current – 40 to 1000 Hz and AC Voltage – 40 to 10000 Hz). These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout (mosaic mounting). The front glass, bezel, and dial can be easily replaced.

Compare
Place holder

Modutec MC1 Series – 250° High Torque Taut-Band Movements Meters

Highlights:

Modutec MC1 movements are technically advanced and offer outstanding features not found in other 250° movements. Their unusually small size and their refined taut-band suspension mean high performance in the area of accuracy, tracking, and repeatability. Their unique design includes shock limiters and vibration stops which combined with optional Fluidyne®
viscous damping gives them exceptional durability and stability in difficult environments.

Mounting is usually by means of three tapped brass standoffs which are swaged to either the front or the back of the movement, as ordered, permitting installation within its 1.25″ O.D.

Dials can be mounted to standoffs on the front of the movement; however, MC1 movements are usually ordered with a universal mounting plate (see drawing) installed. This not only serves as a dial mount but also coordinates with the mounting requirements of many domestic and imported movements. Note that front standoffs are not available when the universal mounting plate is installed.

Standard movements come without front and back dust caps. Either or both will be installed when specified on order.

Compare
Modutec PB Series Surface Mount Panel Meters

Modutec PB Series Surface Mount Panel Meters

Highlights:

The PB Series was designed to meet the expressed need of many customers for meters with a hard-hitting, big-dial area “industrial” look.

PB Series meters are available in many sizes, types, and ranges. Mounting stud configuration complies with ANSI standards: the number of studs is as follows: 1½” meters – 2 studs; 2½” & 3½” meters – 3 studs; 4½” meters – 4 studs. Meters in sizes 1½”, 2½”, and 3½” can be supplied in 4- stud versions at no extra cost.

AC meters in this series are offered in both d’Arsonval (rectifier type) and iron-vane versions. The latter has the virtue of greater standard accuracy and relative insensitivity to input distortion, while the rectifier type is less affected by frequency variations.

Compare
A&M MR Panel Meter Ruggedized Series

A&M MR Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. MR34 Long-scale panel meters are ideal for military and commercial applications. Available 1.5″ (MR13), 2.5″ (MR26) and 3.5″ (MR34 & MR35)sizes.

Compare
Jewell DS Series Moving Coil Panel Meters

Jewell DE Series – Moving Iron

Highlights:

The moving iron panel meters, DE 48/72/96/144 housed in cases made of molded polycarbonate are suitable for the measurement of AC currents for the frequency range of 15 to 400 Hz and voltages in the frequency range of 15 to 100Hz. Moving iron meters indicate RMS values practically independent of waveform even of high harmonics. An error of indication may occur for extreme waveforms (e.g. phase gating controls) & for frequencies above 100KHz.

These meters offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout mosaic mounting. For CT-operated ammeters, dials can be fitted based on CT ratio. Glass and bezel can easily be replaced.

Compare
Modutec E-Series 2? Edgewise Panel Meters

Modutec E-Series 2″ Edgewise Panel Meters

Highlights:

Compact edgewise meter only ½” thick. Self-shielding allows users to stack without magnetic interaction. Lightwell provided for backlighting. Available size 2″.

Compare
Modutec MD & ME Series Edgewise Panel Meters

Modutec MD & ME Series Edgewise Panel Meters

Highlights:

Useful space-saving meters in two sizes, interchangeable with many costly d’Arsonval meters or moving magnet meters from other sources. All sizes feature flush-to-panel covers without the bulge that disfigures many edgewise meters. A low-cost option provides internal illumination through a translucent dial – sophisticated lighting unusual in any economy meter, let alone an edgewise type.

Compare
MODUTEC BL Digital panel meter

Modutec BL Series

Highlights:

The MODUTEC BL Digital panel meter gives you all the functionality you need with none of the extras you don’t need. That means simplicity, easy readability, a small footprint, and a low cost.

 

 

Compare
Triplett Ruggedized Series

Triplett Ruggedized Series

Highlights:

HR Thermoplastic front with steel back shields this meter from magnetic fields. Available size 3. 5″.

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping