Modutec S-Series Surface Mount Panel Meters
Modutec S-Series Surface Mount Panel Meters

Modutec S-Series Surface Mount Panel Meters

Highlights:

The S Series Surface Mount Panel Meters are clean-cut meters with straightforward design and pleasing aspect ratio are leaders of the Modutec line and add distinction to any instrument or control panel. Available in five sizes and a wide variety of types and ranges, they resolve many problems for the equipment designer and are always a solid choice for function and appearance.

AC Meters in this series are available in both moving coil (rectifier type) and iron vane versions. The latter has the virtue of being relatively insensitive to input distortion, while the rectifier type is less affected by frequency variations.

Compare
Categories: , Tags: , , , ,
Additional information
Features

• Available with DC, AC Iron Vane, and AC Rectified inputs
• DC: µa, mA, A, mV, V, Pyrometer (Thermocouple), DVU
• AC: mA, A, V, VU Frequency
• Custom designed inputs and scales available
How to Order

Please refer to the Series S & W Catalog. When placing an order, replace
the empty box in the catalog number with an "S". Mention any options you would

Related Products

Jewell DSL Series – DC Ammeters/Voltmeters

Jewell DSL Series – DC Ammeters/Voltmeters

Highlights:

The moving coil panel meters, DSL 48/72/96/144 are housed in molded polycarbonate cases are suitable for the measurement of DC currents and voltages. These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cut out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.

Compare

Model 802 Deep Water Submersible Tiltmeter Series

Highlights:

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector. The pressure rating is 250 bars (2500 meters depth). Higher-pressure versions may be special ordered. Temperature rating is governed by the neoprene connector. Wider temperature range is available with other connector types. Units are available in a variety of configurations including single axis (uniaxial), or dual-axis (biaxial), analog, digital, or 4-20mA outputs.

 

Compare
A&M 4951 Switchboard Ruggedized Series

A&M 4951 Switchboard Ruggedized Series

Highlights:

The A&M Model 4951 power factor meters are designed to meet the requirements of MIL-M-19261 and MIL-M-16034. They are supplied as either self-contained or as a “matched-set” with the external transducer. In the external transducer configuration, the transducer is matched to the meter. Both configurations are sealed watertight.

Compare
Model 801 “Tuff Tilt” Tiltmeter SeriesModel C904 Clinometer Pak 420

Model 801 “Tuff Tilt” Tiltmeter Series

Highlights:

The Model 801 “Tuff Tilt” Tiltmeter series combines high precision and durability in an economical instrument package. Using an absolute gravity referenced electrolytic sensor, the 801 series delivers superior measurement accuracy with virtually no long-term drift. Units are available in a variety of configurations including single axis (uniaxial), or dual axis (biaxial), analog, digital, or 4-20mA outputs.

All units are rated IP65 waterproof for advanced protection from the elements.

 

 

Compare
AMH Analog MEMS Inclinometer Series

AMH Analog MEMS Inclinometer Series

Highlights:

The AMH Series is a single or dual axis, high precision MEMS inclinometer. Standard units come with 0-5V, 0.5-4.5V or 4- 20mA output options. All AMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request

 

Compare
Modutec E-Series 2? Edgewise Panel Meters

Modutec E-Series 2″ Edgewise Panel Meters

Highlights:

Compact edgewise meter only ½” thick. Self-shielding allows users to stack without magnetic interaction. Lightwell provided for backlighting. Available size 2″.

Compare
AMI Analog MEMS Inclinometer Series

AMI Analog MEMS Inclinometer Series

Highlights:

The AMI Series is a single or dual axis, high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request

 

Compare
Modutec W-Series Windo-mount™ Panel Meters

Modutec W-Series Windo-mount™ Panel Meters

Highlights:

Windo-mount™ is a sophisticated design that has been found universal acceptance since being introduced many years ago by Modutec. The W series meters are easily installed per applications bulletin AB6-1; when so installed the meter cover is flush with the panel surface, with the dial easily read.

W series meters are available in the same ranges and at the same prices as the S series meters. They offer an excellent functional appearance, plus the looks enhancing edge options available. These meters are very popular for stereo and broadcast equipment.

Compare
Modutec PB Series Surface Mount Panel Meters

Modutec PB Series Surface Mount Panel Meters

Highlights:

The PB Series was designed to meet the expressed need of many customers for meters with a hard-hitting, big-dial area “industrial” look.

PB Series meters are available in many sizes, types, and ranges. Mounting stud configuration complies with ANSI standards: the number of studs is as follows: 1½” meters – 2 studs; 2½” & 3½” meters – 3 studs; 4½” meters – 4 studs. Meters in sizes 1½”, 2½”, and 3½” can be supplied in 4- stud versions at no extra cost.

AC meters in this series are offered in both d’Arsonval (rectifier type) and iron-vane versions. The latter has the virtue of greater standard accuracy and relative insensitivity to input distortion, while the rectifier type is less affected by frequency variations.

Compare
Jewell DS Series Moving Coil Panel Meters

Jewell DE Series – Moving Iron

Highlights:

The moving iron panel meters, DE 48/72/96/144 housed in cases made of molded polycarbonate are suitable for the measurement of AC currents for the frequency range of 15 to 400 Hz and voltages in the frequency range of 15 to 100Hz. Moving iron meters indicate RMS values practically independent of waveform even of high harmonics. An error of indication may occur for extreme waveforms (e.g. phase gating controls) & for frequencies above 100KHz.

These meters offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout mosaic mounting. For CT-operated ammeters, dials can be fitted based on CT ratio. Glass and bezel can easily be replaced.

Compare
A&M 2.5 Square Ruggedized Series

A&M 2.5 Square Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.

Compare
Place holder

Modutec MC1 Series – 250° High Torque Taut-Band Movements Meters

Highlights:

Modutec MC1 movements are technically advanced and offer outstanding features not found in other 250° movements. Their unusually small size and their refined taut-band suspension mean high performance in the area of accuracy, tracking, and repeatability. Their unique design includes shock limiters and vibration stops which combined with optional Fluidyne®
viscous damping gives them exceptional durability and stability in difficult environments.

Mounting is usually by means of three tapped brass standoffs which are swaged to either the front or the back of the movement, as ordered, permitting installation within its 1.25″ O.D.

Dials can be mounted to standoffs on the front of the movement; however, MC1 movements are usually ordered with a universal mounting plate (see drawing) installed. This not only serves as a dial mount but also coordinates with the mounting requirements of many domestic and imported movements. Note that front standoffs are not available when the universal mounting plate is installed.

Standard movements come without front and back dust caps. Either or both will be installed when specified on order.

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping