Modutec World Meter Series – Windo-Mount™ Panel Meters
Modutec World Meter Series – Windo-Mount™ Panel Meters

Modutec World Meter Series – Windo-Mount™ Panel Meters

Highlights:

The World Meters incorporate Modutec’s third-generation taut-band/moving-coil movement – unmatched in any competitive production meter, anywhere – with a space-efficient case and dial configuration that takes about 30% less space than conventional panel meters. The result is a rugged and accurate meter with unique and desirable features, at a very economical price.

Compare
Categories: , Tags: , , , , , ,
Additional information
Features

• Small frontal area and small behind-panel volume helps solve packaging-density problems – a 4½" meter with its big,
legible dial easily fits into a 3½" rack panel.
• Large translucent dial designed for shadowless backlighting.
• Small, fully insulated barrel – a boon to technicians.
• Quick-connect terminals on the case or rear of the barrel.
• Ideal for PC board applications.
• Real zero adjust optional.
How to Order

Please refer to the World Meter Catalog in the Downloads section of this page. Mention any options you would like to add to your meter.

Related Products

Place holder

Modutec MC1 Series – 250° High Torque Taut-Band Movements Meters

Highlights:

Modutec MC1 movements are technically advanced and offer outstanding features not found in other 250° movements. Their unusually small size and their refined taut-band suspension mean high performance in the area of accuracy, tracking, and repeatability. Their unique design includes shock limiters and vibration stops which combined with optional Fluidyne®
viscous damping gives them exceptional durability and stability in difficult environments.

Mounting is usually by means of three tapped brass standoffs which are swaged to either the front or the back of the movement, as ordered, permitting installation within its 1.25″ O.D.

Dials can be mounted to standoffs on the front of the movement; however, MC1 movements are usually ordered with a universal mounting plate (see drawing) installed. This not only serves as a dial mount but also coordinates with the mounting requirements of many domestic and imported movements. Note that front standoffs are not available when the universal mounting plate is installed.

Standard movements come without front and back dust caps. Either or both will be installed when specified on order.

Compare
Modutec DW Series Digital Panel Meters

Modutec DW Series Digital Panel Meters

Highlights:

Get digital accuracy with an analog footprint. The DW Series is a cost-effective solution to retrofitting an analog panel cutout with a digital meter. Custom nomenclature available. Easy hook up from the rear with four studs. The MODUTEC DW Series is available as DC and AC Power Monitors and Process Monitors.

Compare
MODUTEC BL Digital panel meter

Modutec BL Series

Highlights:

The MODUTEC BL Digital panel meter gives you all the functionality you need with none of the extras you don’t need. That means simplicity, easy readability, a small footprint, and a low cost.

 

 

Compare
Modutec S-Series Surface Mount Panel Meters

Modutec S-Series Surface Mount Panel Meters

Highlights:

The S Series Surface Mount Panel Meters are clean-cut meters with straightforward design and pleasing aspect ratio are leaders of the Modutec line and add distinction to any instrument or control panel. Available in five sizes and a wide variety of types and ranges, they resolve many problems for the equipment designer and are always a solid choice for function and appearance.

AC Meters in this series are available in both moving coil (rectifier type) and iron vane versions. The latter has the virtue of being relatively insensitive to input distortion, while the rectifier type is less affected by frequency variations.

Compare
Modutec PB Series Surface Mount Panel Meters

Modutec PB Series Surface Mount Panel Meters

Highlights:

The PB Series was designed to meet the expressed need of many customers for meters with a hard-hitting, big-dial area “industrial” look.

PB Series meters are available in many sizes, types, and ranges. Mounting stud configuration complies with ANSI standards: the number of studs is as follows: 1½” meters – 2 studs; 2½” & 3½” meters – 3 studs; 4½” meters – 4 studs. Meters in sizes 1½”, 2½”, and 3½” can be supplied in 4- stud versions at no extra cost.

AC meters in this series are offered in both d’Arsonval (rectifier type) and iron-vane versions. The latter has the virtue of greater standard accuracy and relative insensitivity to input distortion, while the rectifier type is less affected by frequency variations.

Compare
Jewell DGL Series – AC Ammeters/Voltmeters

Jewell DGL Series – AC Ammeters/Voltmeters

Highlights:

The moving coil, rectifier panel meters DGL 48/72/96/144 are housed in polycarbonate cases and are suitable for the measurement of AC currents and voltages. Moving coil rectifier instruments measure average values and are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current – 40 to 1000 Hz and AC Voltage – 40 to 10000 Hz). These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout (mosaic mounting). The front glass, bezel, and dial can be easily replaced.

Compare
A&M MR Panel Meter Ruggedized Series

A&M MR Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. MR34 Long-scale panel meters are ideal for military and commercial applications. Available 1.5″ (MR13), 2.5″ (MR26) and 3.5″ (MR34 & MR35)sizes.

Compare
A&M 2.5 Square Ruggedized Series

A&M 2.5 Square Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.

Compare

Jewell FML Series – Frequency Meters

Highlights:

The pointer type frequency meters, FML 96 and FML 144 housed in molded polycarbonate cases are used for the measurement of frequencies in the range of 45 to 450 Hz. For maximum accuracy, the essential measuring range is obtained by suppressing the unwanted frequency span. These instruments offer several advantages in switchboards and panel cut out. A number of meters can be mounted in a panel cut-out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.

Compare
AMI Analog MEMS Inclinometer Series

AMI Analog MEMS Inclinometer Series

Highlights:

The AMI Series is a single or dual axis, high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request

 

Compare
Jewell surface mounted 50 series analog panel meter

Jewell 50 Series

Highlights:

The Jewell surface mounted 50 series analog panel meter is designed with traditional black case and glass windows. Black phenolic Bakelite covers and cases suited for industrial equipment. Available in both round and square shapes.

Compare

Model 820 Shallow Water Tiltmeter Series

Highlights:

The model 820 Shallow Water is a high-precision submersible tiltmeter for use in fresh and saltwater applications. Using an absolute gravity-referenced electrolytic sensor, the 820 delivers superior measurement accuracy with virtually no long-term drift. High-gain units are sensitive to <0.0017 mm/m or better. Output options include analog (±5 VDC, ±10 VDC), current (4-20mA), and digital (RS-232 and RS-422). All units are rated to 200 meters (656.2 ft) waterproof for advanced protection from the elements. Use the 820 “Shallow Water” for structural monitoring, angle measurement and control, platform leveling, and more.

 

 

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping